Sensor (Booklet Unit Media Exit) Lag Jam - Lexmark X940e Service Manual

7510-XXX
Step
11 Perform a print test.
Does the error remain?

289.05 Sensor (booklet unit media exit) lag jam

Step
1 Check the booklet unit interface connector assembly.
Is the above component free of damage?
2 Check the main connector on the booklet unit sensor
interface cable assembly.
Is the above component free of damage?
3 Check the main connector on the booklet unit motor
interface cable assembly.
Is the above component free of damage?
4 Check the sensor (booklet unit media exit) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Booklet path
5. Touch Booklet unit media exit
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
5 Check the sensor (booklet unit media exit) for proper
connection.
Is the above component properly connected?
2-50
MFP Finisher Service Manual
Check
Check
Yes
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-115.
Yes
Go to step 2. Replace the
booklet unit
interface
connector
assembly.
Go to step 3. Replace the
booklet unit sensor
interface cable
assembly.
Go to step 4. Replace the
booklet unit motor
interface cable
assembly.
Go to step 6. Go to step 5.
Replace the Replace the
sensor (booklet connection.
unit media exit).
Go to "Sensor
(booklet unit
media exit)
removal" on
page 4-138.
No
No