CS9360 User's Guide
2.1.2
Rear section
3
1
7
N°.
Name
1
Roll media holder
2
Media feed slot
3
Ink cartridge slot
4
Media guide
5
AC inlet
6
Network interface cable
connector
7
Waste fluid valve
2
5
6
Load the roll media.
The flanges to attach roll media and the fixing levers to fix the roll media holders are
included.
Used for feeding media.
Insert the ink cartridge.
Used for feeding media smoothly when the media is set or printed.
The heater (pre-heater) to warm up the media is installed inside.
Used for connecting the power cable.
Connects a network interface cable.
Open and close when discharging the waste fluid from the waste fluid tank.
It is normally closed.
2-19
4
1
Function