1
ASSEMBLY (TIMING BELT)
Tensioner
1—74
Timing Belt Idler Pulley
Install the tinning belt idler pulley.
Tightening torque:
37—52 N m (3.8—5.3 m-kg, 27—38 ft-lb)
Timing Belt Tensioner
1. Install the timing belt tensioner and tensioner
spring.
2. Tentatively secure the tensioner with the spring fully
extended.
69G01B-165
Timing Belt
1. Install the timing belt so that there is no looseness
at the water pump pulley and idler pulley side.
Caution
a) If the timing belt is being reused, it must be
reinstalled to rotate in the original direction.
b) Check that there is no oil, grease, or dirt on
the timing belt.
86U01X-161
2. Loosen the tensioner lock bolt.
3. Turn the crankshaft twice in the direction of rotation.
4. Check that the mating marks are correctly aligned.
If not aligned, remove the timing belt and tension
er, and repeat the above-mentioned procedure.
79G01C-097
5. Tighten the timing belt tensioner lock bolt.
Tightening torque:
37—52 N-m (3.8—5.3 m-kg, 27—38 ft-lb)
4BG01A-186