ASSEMBLY (AUXILIARY PARTS)
Knock Sensor (Turbo)
Install the knock sensor.
Tightening torque:
20—34 N m (2.0—3.5 m-kg, 14—25 ft-lb)
Oil Pressure Switch
Install the oil pressure switch.
Tightening torque: 12—18 N-m
(1.2—1.8 m-kg, 104—156 in-lb)
Oil Cooler (Turbo)
Install the oil cooler.
Tightening torque:
29—39 N m (3.0—4.0 m-kg, 22—29 ft-lb)
Oil Filter
1. Apply engine oil to the rubber gasket of the new
filter.
2. Install the oil filter, and tighten it by hand only. Do
not use a wrench.
Intake Manifold Assembly
1. Place the new gasket in position.
2. Install the intake manifold assembly.
3. Tighten the nuts in two or three steps.
Tightening torque:
19—30 Nm (1.9—3.1 m-kg, 14—22 ft-lb)
Intake Manifold Bracket
Install the intake manifold bracket.
Tightening torque:
19—30 Nm (1.9—3.1 m-kg, 14—22 ft-lb)
1
1 -77