Lock Nut; Shift Fork And Shift Rod Assembly - Mazda 626 MX-6 Workshop Manual

7A
DISASSEMBLY
49 G019 0A0
7
* - * - —
Disassembly Note
Transaxle
Mount the transaxle on the SST.
49 0107 680A
86U07A-037

Lock nut

1. Lock the primary shaft with the SST.
2. Shift to 1st or 2nd gear.
3. Remove the lock nut.
86U07A-038

Shift fork and shift rod assembly

1. Align the ends of the interlock sleeve and of the
control lever, then turn the shift rod counter­
clockwise.
2. While holding the 1st-2nd shift fork with one hand
and the 3rd-4th shift fork with the other, raise them
both at the same time and shift each of the clutch
hub sleeves.
86U07A-039
3. Lift the control end and remove the steel ball, and,
at the same time, remove the shift rod from the
clutch housing.
4. Separate the shift rod and shift fork assembly from
each of the clutch hub sleeves.
76U07A-227