5 STARTER
5—26
6. Segments groove depth
If the depth of the groove is less than standard,
undercut the grooves to the standard depth.
Standard depth: 0.5—0.8 mm (0.02—0.03 in)
Minimum depth: 0.2 mm (0.008 in).
7BU05X-041
Magnetic Switch
1. Wiring damage (©term inal — ©terminal).
Check for continuity between the ©terminal and
the ©terminal using a circuit tester. Replace the
magnetic switch if there is no continuity.
67U05X-053
2. Wiring damage (©terminal — body)
Check for continuity between © terminal and
body using a circuit tester.
Replace the magnetic switch if there is no con
tinuity.
67U05X-054
Ground of magnetic switch
Check for continuity between © a n d ©terminals
using a circuit tester. Replace the magnetic switch
if there is continuity.
67U05X-055