Table of Contents
Advertisement
1
ASSEMBLY (AUXILIARY PARTS)
1—80
Exhaust Manifold Assembly
1. Place the new gaskets in position with the ridge
facing the cylinder head.
2. Install the exhaust manifold assembly.
3. Tighten the nuts in two or three steps.
Tightening torque:
22—28 Nm (2.2—2.9 m-kg, 16—21 ft-lb)
4. Tighten the turbocharger to the bracket (Turbo).
Tightening torque:
25—32 N m (2.5—3.3 m-kg, 18—24 ft-lb)
Oil Pipe and Turbocharger Hose (Turbo)
1. Install the oil pipe.
Tightening torque:
® : 22—27 N m
(2.2—2.8 m-kg, 16—20 ft-lb)
(B): 16—24 N m
(1.6—2.4 m-kg, 12—17 ft-lb)
2. Tighten the oil pipe bracket and connect the oil
hose and water hoses.
Tightening torque:
19—30 N m (1.9—3.1 m-kg, 14—22 ft-lb)
EGR Pipe
Install the EGR pipe.
Tightening torque:
34—44 N m (3.5—4.5 m-kg, 25—33 ft-lb)
Exhaust Manifold Insulator
Install the exhaust manifold insulator.
Tightening torque:
19—30 N m (1.9—3.1 m-kg, 14—22 ft-lb)
86U01X-177
P/S Oil Pump Bracket
Install the P/S oil pump bracket.
Tightening torque:
37—63 Nm (3.8—6.4 m-kg, 27—46 ft-lb)
86U01X-178
Advertisement
Table of Contents
Troubleshooting
