Distributor Assembly And Installation - Mazda 626 MX-6 Workshop Manual

Non-Turbo
ASSEM BLY
Assemble in the reverse order of disassembly, refer­
ring to the assembly note.
86U05X-062
Assembly Note
Align the coupling set blade with the alignment mark
and check that the rotor is aligned as shown in the
illustration.
Turbo
86U05X-084
IN STALLATIO N
Note
After installing the distributor, adjust the ig­
nition timing (Refer to 5— 34).
1. Apply engine oil to the O-ring and driven gear.
2. Install the distributor and connect the high-tension
leads and distributor connector.
3. Tighten lock bolt to the specified torque.
Torque specification:
19— 25 Nm (1.9— 2.6 m-kg, 14— 18 ft-lb)
626, MX-6 Revised 10/87
DISTRIBUTOR 5
5 -3 9