Oil Pan Inspection; Oil Pan Installation - Mazda 626 MX-6 Workshop Manual

INSPECTION
Check the following points. Repair or replace if
necessary.
1. Cracks, deformation, damage
2. Damaged drain plug threads
4BG02X-037
INSTALLATION
Install in the reverse order of removal referring to the
installation note.
Installation Note
Stiffener, oil strainer, and oil pan
1. Remove any dirt or other material from the con­
tact surfaces.
2. Apply silicon sealant to the stiffener around inside
of the bolt holes and over lap the ends.
76G02X-603
3. Apply a continuous bead of silicon sealant to the
oil pan around inside of the bolt holes and over
lap the ends.
Caution
Secure the stiffener and oil pan within 30
minutes after applying the sealant.
86U02X-015
4. Install the stiffener; then the oil strainer and a new
gasket.
Oil strainer tightening torque:
8—12 Nm (80—120 cm-kg, 69—104 in-lb)
5. Install the oil pan.
Tightening torque:
7—12 N m (70—120 cm-kg, 61—104 in-lb)
Steps After Installation
1. Supply the specified amount and type of oil.
2. Start the engine and check for leakage.
86U02X-016
OIL PAN 2
2 - 7
______
JL