Mazda 626 MX-6 Workshop Manual page 455

7A
DISASSEMBLY
7A-58
Secondary Shaft Gear
1. Worn or damaged gear contact surface.
2. Worn or damaged splines.
3. Worn teeth.
4. Clogged oil passage.
5. Secondary shaft gear run-out.
Run-out: 0.03 mm (0.0012 in) max.
Note
If the shaft gear is replaced, adjust the bear­
ing preload. (Refer to Page 7A—67)
Outer diameter:
A. 42.80—42.91 mm (1.685—1.689 in)
B. 36.95—37.11 mm (1.455—1.461 in)
86U07A-146
Inner diameter (gears):
1st. 48.00—48.02 mm (1.890—1.891 in)
2nd. 50.00—50.02 mm (1.968—1.969 in)
86U07A-147
Bearing
1. Roughness or noise while turning.
2. Damaged bearing
3. Worn bearing.
63G07C-122