Table of Contents
Advertisement
B
(1988 626, MX-6)
1-90
INSTALLATION
High-Tension Lead
Connect the high-tension lead to the ignition coil.
Accelerator Cable and Throttle Cable (ATX)
1. Install the accelerator cable and the throttle cable (ATX).
2. Check the deflection of the cable.
Deflection: 1—3mm (0.04—0.12 in)
Battery and Battery Carrier
1. Install the battery carrier.
16U0BX-023
Tightening torque:
9—13 Nm (90—130 cm-kg, 78—113 In-lb)
2. Install the fuse box.
Tightening torque:
8—11 N-m (80—110 cm-kg, 69—95 in-lb)
3. Install the battery tray and battery.
Tightening torque:
5—7 Nm (50—70 cm-kg, 43—61 in-lb)
76G01A-148
Air Cleaner Assembly
1. Install the air cleaner assembly.
Tightening torque:
16—27 Nm (1.6—2.8 m-kg, 12—20 ft-lb)
2. Connect the air flow sensor connector, air intake pipe, and
EGR air hose.
76F01C-044
Engine Oil
Add the specified amount and type of engine oil. (Refer to Sec
tion D.)
16U0BX-024
Coolant
Close the drain plug, fill the radiator and reservoir tank with
the specified amount and type of coolant. (Refer to Section E.)
Check Engine Condition
1. Check for leaks.
2. Perform engine adjustments if necessary.
3. Perform a road test.
4. Recheck the oil and coolant levels.
16U0BX-025
Revised 3/91
Advertisement
Table of Contents
Troubleshooting
