Mazda 626 MX-6 Workshop Manual page 398

6 CLUTCH AND FLYWHEEL
5. Clean the clutch disc splines and primary shaft
splines, then apply clutch grease (Mori White TA
No. 2 or equivalent organic molybdenum
grease)
6. Install the clutch disc with the SST.
Note
Install the clutch so that it faces in the direc­
tion shown in the figure.
7. Install the SST, and tighten the clutch cover di­
agonally and evenly.
Tightening torque: 18—26 N-m
(1.8—2.7 m-kg, 13.0—20.3 ft-lb)
8. Install the transaxle. (Refer to Section 7A.)
86U06X-044