Mazda 626 MX-6 Workshop Manual page 412

7A
REMOVAL
7A—14
11. Remove the clutch release cylinder.
12. Disconnect the tie-rod ends using SST.
86U07A-023
13. Remove the stabilizer bar control links.
14. Remove the bolts and nuts at the left and right low­
er arm bolt joints.
15. Pull the lower arms downward to separate them
from the knuckles.
Note
Do not damage the ball-joint dust boots.
86U07A-024
16. Separate the left driveshaft from the transaxle by
prying with a bar inserted between the shaft and
the case.
Note
Do not damage the oil seal.
86U07A-025
17. Remove the joint shaft bracket.
18. Separate the right driveshaft together with the joint
shaft in the same manner.
86U07A-026