Mazda 626 MX-6 Workshop Manual page 23

twice
ON-VEHICLE MAINTENANCE (TIMING BELT)
2. Check that the " f 1 " mark of the camshaft pulley
is aligned with the timing mark. If it is not aligned,
turn the camshaft to align.
69G01B-025
3. Install the timing belt tensioner and spring. Tem­
porarily secure it with the spring fully extended.
4BG01A-033
4. Install the timing belt so that there is no looseness
at the water pump pulley and idler pulley side.
Caution
a) If the timing belt is being reused, it must be
reinstalled to rotate in the original direction.
b) Check that there is no oil, greas6, or dirt on
the timing belt.
'Tension side
86U01X-027
5. Loosen the tensioner lock bolt.
6. Turn the crankshaft twice in the direction of rota­
tion, and align the mating marks.
7. Check that the timing marks are correctly aligned.
If not aligned, remove the timing belt tensioner and
timing belt, and repeat steps 1—6.
69G01B-027
1