Mazda 626 MX-6 Workshop Manual page 275

TURBOCHARGING SYSTEM
3. When reinstalling the turbocharger, perform the fol­
lowing:
(1) Remove all the gaskets and sealant.
(2) Use new gaskets.
(3) Supply 25 cc (1.5 cu in) of oil in the oil pas­
sage of the turbocharger.
86U04B-055
4. After replacing the turbocharger, perform the fol­
lowing:
(1) Disconnect the connector from the igniter.
(2) Crank the engine for 20 seconds.
(3) Reconnect the connector.
(4) Start the engine and run at idle for 30 seconds.
(5) Stop the engine and disconnect the negative
battery cable and depress the brake pedal for
at least 5 seconds to cancel the malfuction
code.
4B
4B-55