Mazda 626 MX-6 Workshop Manual page 296

4B
FUEL SYSTEM
Insulator
i Pi
Manifold
4B-76
10. Remove the grommets, injectors, and insulators.
11. Install in the reverse order of removal, referring to
Installation note
Injector
1. Use new O-rings.
2. Apply a small amount of engine oil to the O-rings
3. Install the injectors and the injector insulators.
O - r in g
Grommet
I
Delivery pipe
86U04A-109
installation note.
Tightening torque:
Delivery pipe
Dynamic chamber
Engine hanger
when installing.
19—25 N m
(1.9—2.6 m-kg,
14—19 ft-lb)