Step 4 - Mazda 626 MX-6 Workshop Manual

STEP 4 (Differential)
Disassemble in the sequence shown in the figure referring to the disassembly note for the specially
marked parts.
Note
If any of the bearings are removed, replace with new ones.
1. Knock pin
2. Pinion shaft
3. Pinion gear
4. Thrust washer
5. Side gear
6. Thrust washer
7. Side bearing inner race
8. Speedometer drive gear
9. Side bearing inner race
10. Gear case
Disassembly Note
Backlash
Before disassembly, check the backlash of the side
gears and pinion gears. (Refer to page 7A—62)
Standard backlash: 0—0.1 mm (0—0.004 in)
86U07A-139
7A
DISASSEMBLY
8 6 U 0 7 M 3 8
61G07X-067
7A-55