Mazda 626 MX-6 Workshop Manual page 463

7A
ASSEMBLY
7 A—66
6. Install the 3rd gear, the secondary 3rd gear, spacer
and the secondary 4th gear.
7. Install the new bearing inner race with the SST.
Note
Check that the spacer does not rotate.
86U07A-167
8. Install the new bearing inner race with the SST.
86U07A-168
9. Measure the clearance between the 1st gear and
thrust washer.
Clearance: 0.130—0.354 mm
(0.0051—0.0139 in)
10. Measure the clearance between the 2nd gear and
secondary 3rd gear.
If clearance is not within specification, replace any
part which is worn or damaged.
Clearance: 0.150—0.262 mm
(0.0059—0.0103 in)
86U07A-170