Shift Indicator Control System Troubleshooting; Shift Indicator Control System Inspection; Shift Indicator Light Check - Mazda 626 MX-6 Workshop Manual

TROUBLESHOOTING
Check the condition of the wiring harness and connectors before checking the sensor or switches below.
Note
Make the system inspection first. If no problem is found, continue with the next system
inspection of the Troubleshooting Guide. (Refer to pages 4A—8 and 9.)
SHIFT INDICATOR LIGHT CONTROL SYSTEM
System Inspection
1. Drive the vehicle in 1st gear and less than half­
throttle.
2. Verify that the shift indicator light illuminates dur­
ing acceleration.
86U04A-164
Shift Indicator Light
1. Ground 1S terminal (G) of the engine control unit.
2. Shift the transmission into a forward gear (except
5th).
3. Turn the ignition switch ON.
4. Verify that the shift indicator light illuminates.
5. If the shift indicator light does not illuminate, check
the shift indicator bulb and sift indicator light circuit.
86U04A-165
4 A
86U04A-163
4A-83