Table of Contents
Advertisement
•t c
N < H 4 . * : m
RADIATOR
Revised 3/91
INSTALLATION
Turbocharger Oil Pipe and Hose (Turbo)
1. Install the turbocharger pipe.
Tightening torque
® : 64—89 N m (6.5—9.1 m-kg, 47—66 ft-lb)
(§): 8—11 N m (80—110 cm-kg, 69—95 in-lb)
2. Connect the turbocharger hoses.
76F01C-043
Radiator
1. Install the radiator and cooling fan.
Tightening torque:
8—11 N-m (80—110 cm-kg, 69—95 in-lb)
2. Connect the radiator harness.
3. Connect the ATF hoses (ATX).
76G01A-147
4. Connect the upper and lower radiator hoses.
Note
• Position the hose clamp in the original location on
the hose.
• Squeeze the clamp lightly with large pliers to en
sure a good fit.
The damper bush on the bracket and the stud on the radiator
should be centered as illustrated
Altgn the center by moving the radiator and/or brackets!*:
T T T T T
T
^
16U0EX-050
Heater Hose and Fuel Hose
Connect the heater hoses and the fuel hoses.
86U01X-199
B
(1988 626, MX-6) 1-89
Advertisement
Table of Contents
Troubleshooting
