Mazda 626 MX-6 Workshop Manual page 301

Fuel filler hose:
Push in at least
35 mm (1.4 in)
Others: At least 25 mm (1.0 in)
86U04A-120
FUEL SYSTEM
Installation note
Hoses
1. Push the hose ends of the main fuel hose, fuel re­
turn hose and evaporation hoses onto the fuel tank
fittings at least 25 mm (1.0 in).
2. Push the fuel filler hose ends onto the fuel tank pipe
and filler pipe at least 35 mm (1.4 in).
Steering angle transfer shaft
(4-wheel steering)
Refer to section 10
4B
4B-81