Mazda 626 MX-6 Workshop Manual page 179

4A
FUEL SYSTEM
Insulator
Manifold
4A—60
11. Remove the grommets, injectors, and insulators.
12. Install in the reverse order of removal, referring to
O -ring
Grom met
1
Delivery pipe
86U04A-109
installation note.
Tightening torque:
Delivery pipe
Dynamic chamber
Engine hanger
Installation note
Injector
1. Use new O-rings.
2. Apply a small amount of engine oil to the O-rings
when installing.
3. Install the injectors and the injector insulators.
,19—25 N m
(1.9—2.6 m-kg,
14—19 ft-lb)