Standard Usb Port Disabled; Standard Parallel Port Disabled; Too Many Disks Installed - Lexmark x950 series User Manual

Troubleshooting
56 Parallel port [x] disabled
Try one or more of the following:
•
Touch Continue to clear the message.
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Serial port [x] disabled
Try one or more of the following:
•
Touch Continue to clear the message.
The printer discards any data received through the serial port.
•
Make sure the Serial Buffer menu is not set to Disabled.

56 Standard USB port disabled

Try one or more of the following:
•
Touch Continue to clear the message.
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.

56 Standard parallel port disabled

Try one or more of the following:
•
Touch Continue to clear the message.
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu item is not set to Disabled.
56 USB port [x] disabled
Try one or more of the following:
•
Touch Continue to clear the message.
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu is not set to Disabled.

58 Too many disks installed

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess disks.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
295