E-Mailing; Using The Automatic Document Feeder And Scanner Glass; Configuring The E-Mail Server Settings - Lexmark MB2442 User Manual

E-mailing

E-mailing

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
Configuring the e‑mail server settings
You can send scanned documents through e-mail after setting up the SMTP server. For more information on
SMTP settings, see the
Using the control panel
1
From the home screen, touch Settings > E‑mail > E‑mail Setup.
2
Configure the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > E‑mail.
3
From the E‑mail Setup section, configure the settings.
4
Click Save.
help document.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
44