Understanding the printer menus
Menu item
Staple Job
Off
Auto
Back
Dual
Dual Double
Front
Hole Punch
Off
On
Hole Punch Mode
2 holes
3 holes
4 holes
Offset Pages
None
Between Copies
Between Jobs
Quality menu
Use
Print Mode
Color
Black Only
Color Correction
Auto
Off
Manual
Print Resolution
1200 dpi
2400 Image Q
Toner Darkness
1–5
Description
Specifies whether the prints are stapled
Notes:
•
Off is the factory default setting.
•
This menu appears only when a stapler is installed.
Specifies whether the prints have punched holes
Note: This menu appears only when a puncher is installed.
Determines the type of punch finishing performed on a printed output
Notes:
•
"2 holes" is the factory default setting regardless of hardware.
•
"3 holes" and "4 holes" appear only when their respective hole punch
hardware is installed.
•
Offsets pages at certain instances
Notes:
•
None is the factory default setting.
•
Between Copies offsets each copy of a print job if Collate is set to On. If
Collate is set to Off, each set of printed pages are offset, such as all page
1's and all page 2's.
•
Between Jobs sets the same offset position for the entire print job
regardless of the number of copies printed.
•
This menu appears only when a stapler is installed.
To
Specify whether to print images in color.
Note: Color is the factory default setting.
Adjust the color output on the printed page.
Note: Auto is the factory default setting.
Specify the output resolution in dots per inch (dpi) or in image quality.
Note: 2400 Image Q is the factory default setting.
Lighten or darken the output.
Note: 3 is the factory default setting.
212