Figure 39. Acl Interface Configuration Window (2) - Samsung WEC8500 Operation Manual

Access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

2600-00FK1RGA4

To perform detail configuration, select an interface in the list.

The types of interfaces you can configure are retrieved. In the INTERFACE, select an

interface. For DIRECTION, select Ingress or Egress. For ACL NAME, select an item

(name) that is configured in the ACL List configuration.

To apply the changed configuration, click the <Apply> button.

3.5.1.3 WLAN ACL Configuration

1) Go to the fqm mode to configure the configure  ACL rule of CLI.

APC# configure terminal

APC/configure# fqm-mode

2) Configure WLAN ACL by entering the 'ip access-group wireless' command.

ip access-group wireless [ACL_NAME]

3) To check the configuration information, use the 'show running-config network'

Figure 39. ACL Interface Configuration Window (2)

CHAPTER 3. Data Network Function

ACL name to configure

page 109 of 496

Table of Contents