Samsung WEC8500 Operation Manual page 216

2600-00FK1RGA4 Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <QoS> menu in the sub-menus.
1) Select one out of None/Default/User Priority in the 802.1P POLICY drop-down list of
Tagging Policy.
2) To disable a DSCP policy in the DSCP POLICY, select Disable.
3) To enable a DSCP policy in the DSCP POLICY, select Enable.
A) Select one out of Inner Packet/Default Value in the OUTER DSCP drop-down list.
B) Select one out of No Mark/Default Value in the INNER DSCP drop-down list.
4) Select one out of None/802.1p/DSCP in the PROTOCOL drop-down list.
5) Enter 802.1p or a DSCP value into the QoS Default Values.
6) Click the <Apply> button to apply.
6.2.2.2 Wireless Section
The system can provide QoS service in a wireless section for each AP downward packet
type (voice, video, best effort, background). You can configure 802.1p and DSCP tag which
are the criteria used to select access category.
Configuration using CLI
1) Go to configure  QoS mode of a wireless section of CLI.
APC# configure terminal
APC/configure# [80211a/80211bg] qos
APC/configure/80211a/qos#
2) Configure 802.1p or DSCP tag value to use for a packet type.

ap-tags [PACKET_TYPE] [802.1P TAG] [DSCP TAG]
Parameter
PACKET_TYPE
802.1P_TAG
DSCP_TAG
3) To check the QoS parameter information of a configured AP, use the 'show 80211a
[|80211bg] qos ac-profile [PACKET_TYPE]' command.
© SAMSUNG Electronics Co., Ltd.
3.0
Packet type configuration (voice/video/best_effort/background)
802.1p configuration
DSCP tag configuration
CHAPTER 6. Wi-Fi Configuration
Description
page 216 of 496