Samsung WEC8500 Operation Manual page 187

2600-00FK1RGA4 Ver.
5) After enabling the RADIUS server function for authentication, specify the index of
authentication RADIUS server. The RADIUS server information must be configured
in advance.
WEC8500/configure/wlan 1/security# radius-server auth-servers
[RADIUS_SERVER_ID_LIST]
Parameter
RADIUS_SERVER_ID_LIST
6) After enabling the RADIUS server function for accounting, specify the index of
account RADIUS server. The RADIUS server information must be configured in
advance.
WEC8500/configure/wlan 1/security# radius-server acct-servers
[RADIUS_SERVER_ID_LIST]
Parameter
RADIUS_SERVER_ID_LIST
7) After applying the changed configuration, exit the security configuration mode.
WEC8500/configure/wlan 1/security# apply
WEC8500/configure/wlan 1/security# exit
8) To check the configuration information, execute the following command.
WEC8500/configure# show wlan security summary
9) To check configuration information, execute the 'show wlan security summary'
command.
© SAMSUNG Electronics Co., Ltd.
3.0
Description
RADIUS server ID list (Up to 3 IDs can be configured.)
Description
RADIUS server ID list (Up to 3 IDs can be configured.)
CHAPTER 5. WLAN Management
page 187 of 496