System Management - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.

10.2 System Management

10.2.1 Retrieving System Information
Retrieving with CLI
By using the 'show system info' command, you can check the system configuration
information of the APC system such as version information, memory information, disk
information, temperature sensor and fan status, etc.
The execution results of the command in WEC8500 are as follows:
WEC8500/configure# show system info
-----------------------------------------------------
Item
-----------------------------------------------------
System Info :
model type
system description
board version
cpld version
system mac address
system total memory
system total disk
Temperature Sensor Status :
cpu upside sensor
cpu downside sensor
board sensor
Fan Status :
fan[0]
fan[1]
fan[2]
fan[3]
Power Supply Status :
Power Supply[0]
Status
Power Supply[1]
Status
-----------------------------------------------------
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 10. System Management
System Info
WEC8500
Samsung AP Controller
0.1
0.5
00:7e:37:00:1e:70
16046580 KBytes
13520032 KBytes
OK
OK
OK
OK
OK
OK
OK
Equipped
OK
Not Equipped
-
page 330 of 496