Samsung WEC8500 Operation Manual page 320

2600-00FK1RGA4 Ver.
Parameter
INDEX
Configure the version of a server that a NTP client will refer to. (Use a default value 1 if it
is not configured.)

ntp client server-addr hostname <WORD> version [1-4]: Enable

no ntp client server-addr hostname <WORD> version [1-4]: Disable
[Configuring based on IP address]
Enables or disables.

ntp client server-addr ip <A.B.C.D>: Enable

no ntp client server-addr ip <A.B.C.D>: Disable
Configure the index of a server that a NTP client will refer to. (Use a default value 1 if it is
not configured.)

ntp client server-addr ip <A.B.C.D> index [1-5]: Enable

no ntp client server-addr ip <A.B.C.D> index [1-5]: Disable
Configure the version of a server that a NTP client will refer to. (Use a default value 1 if it
is not configured.)

ntp client server-addr ip <A.B.C.D> version [1-4]

no ntp client server-addr ip <A.B.C.D> version [1-4]
You can proceed with configurations simultaneously as shown below.

ntp client server-addr hostname <WORD> index [1-5] version [1-4]

ntp client server-addr hostname <WORD> version [1-4] index [1-5]

ntp client server-addr ip <A.B.C.D> index [1-5] version [1-4]

ntp client server-addr ip <A.B.C.D> version [1-4] index [1-5]

no ntp client server-addr hostname <WORD> index [1-5] version [1-4]

no ntp client server-addr hostname <WORD> version [1-4] index [1-5]

no ntp client server-addr ip <A.B.C.D> index [1-5] version [1-4]

no ntp client server-addr ip <A.B.C.D> version [1-4] index [1-5]
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 9. IP Application
Description
Server index (range: 1-5)
page 320 of 496