Samsung WEC8500 Operation Manual page 194

2600-00FK1RGA4 Ver.
- user-option [1-254] uint [unsigned integer] [active/passive]
- user-option [1-254] int16 [16 bit integer] [active/passive]
- user-option [1-254] uint16 [16 bit unsigned integer]
[active/passive]
- user-option [1-254] ipaddress A.B.C.D [active/passive]
- no user-option [1-254] string [string] [active/passive]
- no user-option [1-254] octet aa:bb:cc [active/passive]
- no user-option [1-254] int [integer] [active/passive]
- no user-option [1-254] uint [unsigned integer] [active/passive]
- no user-option [1-254] int16 [16 bit integer] [active/passive]
- no user-option [1-254] uint16 [16 bit unsigned integer]
[active/passive]
- no user-option [1-254] ipaddress A.B.C.D [active/passive]
no user-option all
A usage example is given below.
WEC8500/configure/ip/dhcp/pool test# user-option 3 string "hi, there"
active
WEC8500/configure/ip/dhcp/pool test# user-option 200 octet
33:4A:5C:6F:DD passive
WEC8500/configure/ip/dhcp/pool test# user-option 201 int -3000
WEC8500/configure/ip/dhcp/pool test# user-option 202 uint16 300
WEC8500/configure/ip/dhcp/pool test# user-option 203 ipaddress
111.22.22.33
[Retrieving Pool Information]
To check the entire information of a DHCP pool, execute the 'show ip dhcp pool' command.
If you enter a pool name as a parameter as shown in 'show ip dhcp pool [POOL NAME]',
you can check the information of a specific pool.
[Retrieving DHCP Lease Information]
To check the DHCP lease information, execute the 'show ip dhcp lease' command.
© SAMSUNG Electronics Co., Ltd.
3.0
Command
CHAPTER 5. WLAN Management
Description
Deletes a configured option.
Deletes all the configured
options.
page 194 of 496