Samsung WEC8500 Operation Manual page 160

2600-00FK1RGA4 Ver.
[max-download]
Configures the maximum number of simultaneous downloads when transmitting the
package file of an AP from the APC to the AP.

Max-download [COUNT]
Parameter
COUNT
[max-retry]
Configures maximum number of re-attempts when AP upgrade is failed.

Max-retry [COUNT]
Parameter
COUNT
[start]
Provides the entire AP upgrade function.

start [UPGRADE_TYPE]
Parameter
UPGRADE_TYPE
If you perform package upgrade after configuring ap upgrade type to predownload, restart
all the APs in the following methods.
WEC8500# configure terminal
WEC8500/configure# ap-all
WEC8500/configure/ap-all# reboot upgrade
[stop]
Provides the function of stopping the image upgrade of all the APs.

stop
[show ap upgrade]
To check the upgrade information of an AP, use the following command.

show ap upgrade summary
© SAMSUNG Electronics Co., Ltd.
3.0
Maximum number of simultaneous downloads of AP image
file (range: 1-50, default: 10)
Maximum number of AP upgrade re-attempts
(range: 1-10, default: 3)
Configures upgrade type (quick-upgrade/predownload)
- quick-upgrade: Perform entire ap upgrade upon an
operator's request.
- predownload: Download ap image to ap first during entire
ap upgrade.
CHAPTER 4. AP Connection Management
Description
Description
Description
page 160 of 496