Figure 136. Classification Change Window In Wids Monitored Ap Detail Screen - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
2) In the AP detail screen, change the classification and click Apply, then the
configuration is changed.

Figure 136. Classification Change Window in WIDS Monitored AP Detail Screen

8.2.2.4 Manual configuration (Remove)
A user can manually change the status of an unauthorized AP to Removed, that is detected
by the WIDS or that is classified according to the rule configured by a user.
Configuration using CLI
1) Go to configure  wids  rogue configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wids# rogue
WEC8500/configure/wids/rogue#
2) By using the MAC of an unauthorized AP to change, execute the remove command.

remove [MAC]
Parameter
3) To check the changed configuration, use the following command.

show wids rogue ap list removed
© SAMSUNG Electronics Co., Ltd.
3.0
MAC
Description
MAC address of an unauthorized AP
CHAPTER 8. Security
page 288 of 496