Samsung WEC8500 Operation Manual page 292

2600-00FK1RGA4 Ver.
2) Configure the unauthorized client detection option by using the following command.

[OPTION] [NOTI_TYPE]
Parameter
OPTION
NOTI_TYPE
The description of OPTION parameter is as follows:
Parameter
assoc-fail-det
auth-fail-det
auth-request-det
deauth-request-det
exclusion-list-check
oneXauth-fail-det
oui-list-check
probe-request-det
webauth-fail-det
3) To check the changed configuration, use the following command.

show wids rogue client current-config
© SAMSUNG Electronics Co., Ltd.
3.0
Rogue Client detect option
Event save option
- Alarm: Notify the state with alarm
- Log: Save the state with sys log
Classifies a client that exceeds the association fail threshold
as an unauthorized client.
Classifies a client that exceeds the authentication fail
threshold as an unauthorized client.
Classifies a client that exceeds the authentication request
threshold as an unauthorized client.
Classifies a client that exceeds the de-authentication request
threshold as an unauthorized client.
Classifies a MAC that does not exist in the client blacklist as
an unauthorized client.
Classifies a client that exceeds the 802.1X authentication fail
threshold as an unauthorized client.
Classifies an OUI that does not exist in the OUI list white list
as an unauthorized client.
Classifies a client that exceeds the probe request threshold
as an unauthorized client.
Classifies a client that exceeds the WEB authentication fail
threshold as an unauthorized client.
CHAPTER 8. Security
Description
Description
page 292 of 496