Figure 100. 802.11A/B/G/N Radio (1) - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
7) Configure the data rate of an AP.

rate [MODE] [RATE] global
Parameter
MODE
RATE
8) To check the configured beacon period, fragmentation threshold, and data rate
information, uses the 'show 80211a radio-config global' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points>  <802.11a/n> or <802.11b/g/n>  <General> menu in the sub-menus.
An example of selecting 802.11a/n is shown below.
The configuration items are as follows:
[AP Basic Configuration]

SERVICE: Enable or disable
[Channel Configuration]

CURRENT CHANNEL: Configures a channel.
− Range for 80211a: 36-165
− Range for 80211bg: 1-14

CHANNEL FIX: The configured channel is configured as fixed and it is not affected
by the automatic adjustment function such as RRM. When selecting the <Monitor>
 <Access Points>  <Radio>  <802.11a/n> or <802.11b/g/n> menu, the channel
value is displayed as *. (Optional)
© SAMSUNG Electronics Co., Ltd.
3.0
Mode (basic/supported)
- basic: Basic rate at which a terminal connects to an AP.
- supported: A connected terminal that supports the supported rate
can communicate with an AP at the supported rate.
Data rate
- Range for 80211a: 6, 9, 12, 18, 24, 36, 48, or 54 Mbps
- Range for 80211bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps

Figure 100. 802.11a/b/g/n radio (1)

CHAPTER 6. Wi-Fi Configuration
Description
page 208 of 496