Figure 131. Wids Friendly Rule Configuration Window - Samsung WEC8500 Operation Manual

Access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

2600-00FK1RGA4

3) To check the configured information, use the 'show wids rogue rule friendly' command.

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<Rogues>  <Policy>  <User Defined Rule> menu in the sub-menus. And then, select

<Friendly> at the upper tab.

1) By using Add, Delete, or Change, operator can add, delete, or change user defined rules.

2) In the rule addition screen, operator can add a rule by entering the information and

click Apply.

- user-configured-ssid [SSID]: Entered SSID (An AP that has SSID as SSID

is classified as a friendly type unauthorized AP.)

SSID that is used when the SSID_TYPE is entered as user-configured-ssid

Figure 131. WIDS Friendly Rule Configuration Window

Figure 132. WIDS Friendly Addition Window

CHAPTER 8. Security

page 284 of 496

Table of Contents