2600-00FK1RGA4
Ver.
4.2.6.2 Real-time Interface Statistics Information
Configuration using CLI
1) Go to configure AP configuration.
WEC8500# configure terminal
WEC8500/configure# ap ap_1
WEC8500/configure/ap ap_1#
2) Configure to make real-time interface statistics information updated periodically.
WEC8500/configure/ap ap_1# get-if-stats
3) To check the interface statistics information of an AP, use the 'show ap if-stats
[AP_NAME]' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Statistics> <AP Ports> menu in the sub-menus.
As shown below, you can retrieve the real-time interface statistics of the AP.
Select an item in the list, then you can check detail information.
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 69. AP Ports window
Figure 70. AP Ports detail information window
CHAPTER 4. AP Connection Management
page 156 of 496