Layer 3 Protocol Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
3.4

Layer 3 Protocol Configuration

This provides the IP address configuration and static/dynamic routing configuration of an
interface. The APC provides the Open Shortest Path First (OSPF) routing protocol.
3.4.1 IP Address Configuration
The procedure for IP address configuration is given below.
1) Go to configure  interface configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# interface ge2
2) Set up an IP address.
WEC8500/configure/interface ge2# ip address 100.100.100.1/24
3) Enable the interface.
WEC8500/configure/interface ge2# no shutdown
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 3. Data Network Function
page 61 of 496