2600-00FK1RGA4
Ver.
4.1.4
Auto Discovery Configuration
The APC provides the AP auto-discovery function that automatically finds and registers
APs in the same network. To configure the function, execute the following commands.
1) Go to configure apc capwap of CLI.
WEC8500# configure terminal
WEC8500/configure# apc
WEC8500/configure/apc # capwap
WEC8500/configure/apc/capwap #
2) Configure the automatic registration function.
auto-discovery
3) Configure an AP group that will be working after AP automatic registration.
auto-discovery-ap-group [AP_GROUP_ID]
Parameter
AP_GROUP_ID
4) To check the configured information, use the 'show apc capwap summary' command.
© SAMSUNG Electronics Co., Ltd.
3.0
ap-group that will be working after AP automatic registration
CHAPTER 4. AP Connection Management
Description
page 130 of 496