Samsung WEC8500 Operation Manual page 65

2600-00FK1RGA4 Ver.
exit
host
max-concurrent-dd
concurrently
maximum-area
neighbor
network
ospf
overflow
passive-interface
redistribute
routing protocol
router-id
summary-address
timers
3) Router ID configuration
Enter an IP address to use.
WEC8500/configure/router/ospf 2# router-id ?
A.B.C.D
WEC8500/configure/router/ospf 2# router-id 10.10.0.1 ?
<cr>
Parameter
OSPF router-id in IP address
4) AUTO COST Configuration
Enter an OSPF cost value (1-4294967) to use.
WEC8500/configure/router/ospf 2# auto-cost ?
reference-bandwidth
OSPF cost
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth ?
1 - 4294967
per second
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth 200 ?
<cr>
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth 200
Parameter
reference-bandwidth
© SAMSUNG Electronics Co., Ltd.
3.0
OSPF router-id in IP address format
CHAPTER 3. Data Network Function
Exit from router mode
OSPF stub host entry
Maximum number allowed to process DD
Maximum number of ospf area
Specify a neighbor router
Enable routing on an IP network
OSPF specific commands
Control overflow
Suppress routing updates on an interface
Redistribute information from another
Router-id for the OSPF process
Configure IP address summaries
Adjust routing timers
Description
Enter an IP address.
Use reference bandwidth method to assign
The reference bandwidth in terms of Mbits
Description
Enter a value from 1-4294967.
page 65 of 496