Samsung WEC8500 Operation Manual page 258

2600-00FK1RGA4 Ver.
[Deleting APC from cluster]
Delete the APC added in cluster. To delete a APC from a cluster, you must delete the APC
from the cluster configuration of all the APCs in the cluster.
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Delete a APC from the cluster. To delete all the APC systems in a cluster, enter the
'cluster del-apc-all' command.

cluster del-apc [INDEX]

cluster del-apc-all
Parameter
INDEX
[Retrieving APC information added in cluster]
You can check the added APC information using the 'show cluster list-apc' command.
WEC8500# show cluster list-apc
======================================================================
INDEX APC-NAME
======================================================================
1 APC-1
2 APC-2
======================================================================
© SAMSUNG Electronics Co., Ltd.
3.0
IPv4-ADDRESS
192.168.87.146 120
192.168.87.217 120
CHAPTER 7. WLAN Additional Services
Description
Index in cluster (range: 1-12)
DB-REF-INT CONNECT-STATUS
CONNECTED[1]
CONNECTED[1]
page 258 of 496