N Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
6.1.2

802.11n Configuration

The 802.11n configuration is as follows:
Configuration using CLI
1) Go to configure  radio mode (80211a or 80211bg) to configure of CLI.
WEC8500# configure terminal
WEC8500/configure# 80211a
2) Go to the 11n-support mode.
WEC8500/configure/80211a#11n-support
3) Configure an AP so that it can support 802.11n property.
WEC8500/configure/80211a/11n-support# enable [AP_ID]
Parameter
AP_ID
4) Configure the Modulation and Coding Scheme (MCS) rate.
WEC8500/configure/80211a/11n-support# mcs [RATE] ap [AP_ID]
Parameter
RATE
AP_ID
5) To check the configured 11n-support information, use the 'show 80211a radio-config
ap [AP_ID]' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points>  <802.11a/n> or <802.11b/g/n>  <General> menu in the sub-menus.
Perform the configuration by referring to '6.1.1 802.11a/b/g Configuration'.
© SAMSUNG Electronics Co., Ltd.
3.0
MSC rate (range: 0-23)
AP ID (range: 1-500)
CHAPTER 6. Wi-Fi Configuration
Description
AP ID (range: 1-500)
Description
page 211 of 496