Figure 83. Initialization Of Wlan Security Function - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <Security>  <L2> tab.
The configuration items available in the window are as follows.
PROFILE NAME
L2 SECURITY TYPE
WPA POLICY
WPA2 POLICY
AUTH KEY
MGMT
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 83. Initialization of WLAN security function

Item
A WLAN configuration name is displayed.
Layer2 security function type
- None: Security function disabled (Select this to initialize the
WLAN security function.)
- Static WEP: Static WEP security function
- 802.1x (Dynamic WEP): Dynamic WEP security function
- Static WEP + 802.1x (Dynamic WEP): Static/Dynamic WEP
security function
- WPA + WPA2: WPA/WPA2 PSK/802.1x security function
WPA WPA Version 1 function is enabled when selected
ENCRYPTION Encryption type
TYPE - TKIP: TKIP type
- CCMP: AES-CCMP type
- Both: TKIP, AES-CCMP type
WPA2 WPA Version 2 function is enabled when selected
ENCRYPTION Encryption type
TYPE - TKIP: TKIP type
- CCMP: AES-CCMP type
- Both: TKIP, AES-CCMP type
PSK/802.1x Authentication key management type
- PSK: PSK (shared key) authentication type
- 802.1x: 802.1x authentication type through a RADIUS
server
PSK FORMAT PSK key input type
- ASCII: ASCII character string
- HEX: Hexadecimal value
PSK KEY PSK key
- 8-63 ASCII character string
- 64-characters of hexadecimal value
CHAPTER 5. WLAN Management
Description
page 176 of 496