2600-00FK1RGA4
Ver.
3) Add or delete an AP to or from a remote AP group. To delete an AP from the remote
AP group, enter 'no' parameter in front of the command. The Region value of an AP
added to a remote AP group is automatically changed to Remote and it is automatically
re-connected to the APC. If an AP is deleted from a remote AP group, the Region value
is changed to Local and the AP is re-connected to the APC.
add-ap [AP_NAME]
no add-ap [AP_NAME]
4) Configure the primary and secondary RADIUS servers. The RADIUS server
information must be created in the radius of the security item in advance. To delete the
configured RADIUS server information, enter 'no' parameter in front of the command.
primary-radius [RADIUS_SERVER_INDEX]
no primary-radius [RADIUS_SERVER_INDEX]
secondary-radius [RADIUS_SERVER_INDEX]
no secondary-radius [RADIUS_SERVER_INDEX]
5) Enable the AP local authentication. To disable the configuration, enter 'no' parameter
in front of the command.
local-auth
no local-auth
6) Execute the 'show remote-ap-group summary' command to check the AP group
information.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. It provides the group configuration of the AP.
Click the <Add> or <Delete> button to add or delete a group.
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 60. Remote AP Groups Add/Delete Window
CHAPTER 4. AP Connection Management
page 141 of 496