2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Network> <OSPF> <General> menu in the sub-menus.
The OSPF initial window is shown below.
Click the ADD button and configure the PROCESS ID to 1-10 in the below screen.
Configuration using CLI
1) Go to configure ospf configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# router ospf
WEC8500/configure# router ospf ?
1 - 10
WEC8500/configure# router ospf 2
WEC8500/configure/router/ospf 2#
2) The detail configuration items of a process ID are as follows:
WEC8500/configure/router/ospf 2# ?
area
auto-cost
to bandwidth
capability
compatible
default-information
information
default-metric
distance
distribute-list
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 31. OSPF Configuration Window
OSPF process ID
CHAPTER 3. Data Network Function
OSPF area parameters
Calculate OSPF interface cost according
Enable specific OSPF feature
OSPF compatibility list
Control distribution of default
Set metric of redistributed routes
Define an administrative distance
Filter networks in routing updates
page 64 of 496