Figure 108. Country Code Window (1) - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Country> menu in the sub-menus.
[Global Country Code Configuration]
1) Select a country in the DEFAULT COUNTRY drop-down list of Configured Country
Code item. (Only an authenticated country code is supported.)
2) Select an environment in the DEFAULT ENVIRONMENT drop-down list.

Both: The terminal operation environment includes all the environments.

Outdoor: The terminal operation environment is outdoor.

Indoor: The terminal operation environment is indoor.

Non-country: A terminal is operating under non-country entity.
3) Click the <Apply> button to apply.
[Editing Country Code]
In the Edit Country Code item, you can add or delete an operation channel per country or
change maximum transmission power per channel.
1) Select a country in the COUNTRY drop-down list of Edit Country Code item.
(Only an authenticated country code is supported.)
2) Select a channel to add in the MAX TX POWER LEVEL (5 GHZ/2.4 GHZ) and enter
maximum transmission power level (0-30).
3) In the MAX TX POWER LEVEL (5 GHZ/2.4 GHZ), unselect a channel to delete.
4) Click the <Apply> button to apply.
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 108. Country code window (1)

CHAPTER 6. Wi-Fi Configuration
page 225 of 496