2600-00FK1RGA4
Ver.
2) Configure the AP mode.
ap-mode [MODE]
Parameter
MODE
3) To check the information of a configured AP, use the 'show ap detail [AP_NAME]'
command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP selection <General> menu in the sub-menus.
After selecting the AP MODE NAME item, click the <Apply> button to apply the
configuration.
© SAMSUNG Electronics Co., Ltd.
3.0
AP operation mode (generalAp/rootAp/repeaterAp/snifferAp)
- generalAp: Typical operation mode. Default value.
- rootAp: AP mode where a repeater AP can be connected.
- repeasterAp: AP mode that is connected to a wireless area and the APC
through the root AP.
- snifferAp: AP mode where the packets operating in a wireless
environment can be captured.
Figure 68. AP mode configuration
CHAPTER 4. AP Connection Management
Description
page 154 of 496