Figure 58. Ap Redundancy Configuration Window - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Parameter
APC_NAME
DISCOVERY_TYPE
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 58. AP redundancy Configuration Window

Enter the name of an APC registered to redundancy.
- Primary apc: The first APC that the AP attempts to connect.
It is usually configured with the currently connected APC.
- Secondary-apc, tertiary-apc: APC that the AP attempts to
connect when there is no response from the primary-apc.
Discovery Type
- ap-followed: Discovery type is set by AP.
- apc-referal: Discovery type is set by APC using the backup
APC lists. To apply the priority of APC to which the AP will
be connected, operator needs to select the apc-referal.
- multicast: Multicast discovery type
- broadcast: broadcast discovery type
- DHCP: Discovery type is interoperating with the DHCP
server. To use this mode, IP ADDRESS POLICY of the AP
must be set to DHCP.
CHAPTER 4. AP Connection Management
Description
page 137 of 496