Figure 86. Wpa/Wpa2 802.1X Configuration (2) - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Item
ACCOUNTI
NG
SERVER
FALLBACK TEST
INTERVAL
ACCOUNTING INTERVAL
Select AUTHENTICATION SERVER and ACCOUNTING SERVER as Enable and
configure the rest items.

Internal RADIUS Server
For WEC8050, operator can use a RADIUS server in the APC. The internal
RADIUS server only supports the authentication function and does not support the
accounting or aaa-override, etc. To use an internal RADIUS server, select 'Internal'
when selecting a RADIUS server during authentication server configuration.
For more information about user configuration of an internal RADIUS server, see
8.1.2.
2) Click the <L2> tab.
Select the L2 Security Type as WPA + WPA2 and AUTH KEY MGMT as 802.1x.
After configuring the rest values as required, click the <Apply> button.
For more information about detail configuration item of L2 tab, see '5.3.1
Initialization of WLAN Security Function'.
© SAMSUNG Electronics Co., Ltd.
3.0
Enable/ Whether the accounting function is enabled.
Disable - Enable: The accounting function is enabled.
- Disable: The accounting function is disabled.
RADIUS Accounting server that will be used as the first priority
SERVER 1 (Can select one out of pre-configured RADIUS servers.)
RADIUS Accounting server that will be used as the second priority
SERVER 2 (Can select one out of pre-configured RADIUS servers.)
RADIUS Accounting server that will be used as the third priority
SERVER 3 (Can select one out of pre-configured RADIUS servers.)
RADIUS server Fallback attempt interval (unit: s, range: 0-500,
default: 0), When set to 0, the fallback function is disabled.
Accounting information transmission interval (unit: s, range: 0-
10000, default: 600), When set to 0, the periodic accounting
information transmission function is disabled.

Figure 86. WPA/WPA2 802.1x Configuration (2)

CHAPTER 5. WLAN Management
Description
page 183 of 496