2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. And then select the name of AP group.
After selecting <Advanced> tab, configure Mode, STAMP INTERVAL, and TIMEZONE
in the Time.
To set the mode to NTP, the NTP server information must be added in advance.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<NTP> <AP> menu in the sub-menus. And then add the NTP server information.
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 62. Items for Time Synchronization Configuration
Figure 63. Configuring NTP server of AP
CHAPTER 4. AP Connection Management
page 145 of 496